Sale!

TKR5005 1/8 EB48.3 Competition Electric Buggy Kit

$559.99 $549.99 price_excluding_tax

This is the 1/8 scale, Electric Powered,

Radio Controlled,EB-48.3 Buggy Kit

from Tekno RC.

1 in stock

SKU: TKR5005 Categories: , , Tags: , , , , , ,

Description

This is the 1/8 scale, Electric Powered, Radio Controlled,           
                       EB-48.3 Buggy Kit from Tekno RC.                        
                                                                               
                            New Features Include;                              
                 Completely Redesigned Suspension Geometry                     
                           New Front and Rear Arms                             
              New Front and Rear 7075 CNC Aluminum Shock Towers                
             New Extra Long Shocks for Increased Suspension Travel             
                   New Tapered 4 x 1.8mm Shock Pistons                         
             New Clamping Spring Perches with Captured Shock Boots             
                               New Rear Hubs                                   
               New Trailing Front Spindles and Spindle Carriers                
                     New V2 Hinge Pin Braces and Inserts                       
                          Low Profile Wing Mount                               
                Revised Bumper for Increased Ground Clearance                  
                    New Split Center Differential Mount                        
                     New Straight Turnbuckle Rod Ends                          
                New Tapered Aluminum Front Center Driveshaft                   
            New Left and Right Hand Threaded Shock Mount Screws                
                     New Easily Adjustable Droop Screws                        
           Revised Shock Standoffs for Easier Droop Measurement                
            Longer Rear Sway bar for More Consistent Traction                  
      Updated Chassis With Increased Clearance for V2 Hinge Pin Settings       
                Updated Setup Sheet for Improved Handling                      
                                                                               
FEATURES: Chassis: CNC aluminum, 0.16" (4mm) thick, adjustable brace system for
             fine tuning flex with front, center, and rear braces              
          Drive: Four wheel shaft, tapered aluminum center driveshaft          
          Motor Mount: Two-piece CNC aluminum construction with dual clamping  
            gear mesh adjusment, lightweight direct to diff mount design       
            accomodates truggy or long can motors up to 3.1" (78mm) long       
          Differentials: Three lightweight fluid filled bevel gear type,       
            updated low wear cross pin design, new ring and pinion gears for   
            smoother operation                                                 
          Battery Tray: Sunken into chassis for super low center of gravity,   
            tray accomodates one 4S or two 2S LiPo packs                       
          Shocks: 16mm big bore, oil filled, CNC threaded shock bodies, caps,  
            cartridge caps, and adjustment nuts, 4mm hardened steel polished   
            shafts, options for vented cap, emulsion, or standard shock        
            configurations, updated internals to minimize shaft deflection     
            new tapered piston design                                          
          Shock Towers: 6mm front, 5mm rear CNC 7075 aluminum, anodized gun-   
            metal gray in color                                                
          Body: Clear polycarbonate buggy, with white plastic high-downforce   
            wing                                                               
          Suspension: Adjustable front arm sweep and angle, equal length front 
            and rear sway bars, adjustable length arms to suit any track       
            conditions, updated front and rear XT arms                         
          Steering: Narrow pivot posts provide zero bump geometry with nearly  
            zero slop, CNC aluminum Ackerman plate rides on 4 precision        
            bearings, adjustable bump-steer and Ackerman, Ackerman describes   
            the effect of the inside front wheel turning faster than the       
            outside front wheel during turns, adjustable steering stops        
          Caster: Adjustable, caster/toe-in refers to the angle of the front   
            suspension when viewed from the side of the car in relation to     
            the chassis, has +1.5° rear outer toe plate for more adjustability 
          Camber: Adjustable front and rear, camber refers to the angle of the 
            tops of the tires from vertical when viewed from front or behind   
            vehicle                                                            
                                                                               
INCLUDES: EB-48.3 Electric Buggy Kit with Body, Rear Wing, Motor Mount, Shocks,
            Shock and Diff Oil, Decals and Instruction Manual                  
                                                                               
REQUIRES: Radio: 2-3 channel with high-speed steering servo (also, standard    
            servo if using brake)                                              
          Motor: Brushless type designed for 1/8 scale buggies                 
          Pinion Gear: Mod 1, Tekno RC 11 - 30t recommended                    
          LiPo Battery: One 4S or two 2S                                       
          Tires: 1/8 scale buggy                                               
          Wheels: 1/8 scale buggy                                              
          Battery Charger: For selected LiPo battery                           
          Paint, tools and track equipment                                     
                                                                               
SPECS:      Buggy-                                                             
          Length: 17.1" (435mm)                                                
          Wheelbase: 12.7-13.2" (323-335mm)                                    
          Width: 12" (306mm), 12.2" (310mm) with optional hubs                 
          Weight: 7.5lbs (3400g) with common electronics & options             
          Diff Ratio: F/R 10/40t, Center 44t                                   
          Battery Tray Dimensions: 1.96 x 5.8" (50 x 148mm) 2x2s or 1x4s config
            Body-                                                              
          Length: 13"  (330mm)                                                 
          Width:   5"  (127mm)                                                 
          Height:  3.1" (80mm)


This is the 1/8 scale electric powered EB-48.3 Buggy Kit from Tekno RC.
FEATURES: Super narrow aluminum chassis, 16mm big bore shocks, clear body,
battery tray accommodates one 4S or two 2S cells, adj. Ackerman & bump steer
REQUIRES: 2-3ch radio w/high torque steering servo, one 4S or two 2S LiPo
batteries, charger, tires, wheels, paint, bldg equip.

Needed to Complete:

  • 2/3 channel radio/transmitter
  • 1/8 Scale ESC and motor
  • High torque steering servo, optional brake servo
  • Pinion or Traktion Drive / Elektri-Clutch system
  • 4-6s LiPo battery
  • 1/8th scale buggy tires, wheels & CA glue
  • Paint for body
  • Hex tools (1.5, 2.0, 2.5mm), pliers, other tools

Additional information

Weight 8 lbs
Dimensions 11 x 7 x 19 in

Reviews

There are no reviews yet.

Be the first to review “TKR5005 1/8 EB48.3 Competition Electric Buggy Kit”

Your email address will not be published. Required fields are marked *