TKR5004 EB48SL 1/8 Superlight 4WD Elec Buggy Kit


TKR5004 EB48SL 1/8 Superlight 4WD Elec Buggy Kit

Available on backorder

SKU: TKR5004 Categories: , Tags: , , , , , , ,


This is the 1/8 scale, Electric Powered, Radio Controlled,
EB48SL Competition Super Light Buggy Kit from Tekno RC.

FEATURES: Chassis: CNC machined aluminum, 0.16″ (4mm) thick, black in color
super narrow design-widest point is 125mm, less than 5″ from
mudguard to mudguard, short chassis overhang provides better bump
handling and jump landing, adjustable chassis brace system for fine
tuning flex with front, center and rear braces
Drive: Four wheel shaft, CV driveshafts with captured pins
Motor Mount: Two-piece CNC aluminum construction with dual clamping
gear mesh adjusment, lightweight direct to diff mount design
Differentials: Three lightweight fluid filled bevel gear type with
redesigned gears with one-piece cross pin design for increased
Battery Tray: Integrated with mud guard and sunken into chassis for
super low center of gravity, tray accomodates one 4S or two 2S
LiPo packs
Shocks: 16mm big bore, oil filled, CNC threaded shock bodies, caps,
cartridge caps, and adjustment nuts, 4mm hardened steel polished
shafts, options for vented cap, emulsion, or standard shock
configurations, new clamping spring perches with captured shock
boots , conical and tapered piston design for different rebound
and compression rates
Shock Towers: 0.16″ (4mm) thick CNC machined 7075 aluminum
Body: Clear polycarbonate buggy, with white plastic high-downforce
wing and low CG wing mount
Suspension: All new SCT410.3 front and rear geometry, adjustable
front arm sweep and angle, new longer rear sway bars for better
consistency, new V2 hinge pin brace system
Steering: Narrow pivot posts provide zero bump geometry with nearly
zero slop, CNC aluminum Ackerman plate rides on 4 precision
bearings, adjustable bump-steer and Ackerman, Ackerman describes
the effect of the inside front wheel turning faster than the
outside front wheel during turns, adjustable steering stops and
full ball bearings
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind

INCLUDES: EB48SL Competition Super Light Buggy Kit with Clear Body, Rear Wing,
Motor Mount, Shocks, Shock and Diff Oil, Decals and Instruction

REQUIRES: Radio: 2-3 channel with high-speed steering servo (also, standard
servo if using brake)
Motor: Brushless type designed for 1/8 scale buggies
Pinion Gear: Mod 1, Tekno RC 11 – 30t recommended
LiPo Battery: 2S
Tires: 1/8 scale buggy
Wheels: 1/8 scale buggy with 17mm hex
Battery Charger: For selected LiPo battery
Paint, tools and track equipment

SPECS:      Buggy-
Length: 20.5″ (522mm)
Wheelbase: 12.7-13.2″ (323-335mm)
Width: 12″ (306mm)
Weight: 6.5lbs (2950g) with common electronics & options
Diff Ratio: F/R 10/40t, Center 44t
Battery Tray Dimensions: 1.96 x 5.8″ (50 x 148mm) 2x2s or 1x4s config
Length: 13.25″ (336mm)
Width:   4.9″  (125mm)
Height:  3.6″   (86mm)

COMMENTS: For Replacement Ball Bearings use:
Qty.  Size      Location                  Qty. Bearing Set
2   8x16mm    Ctr. Diff                   1    DTXC1585
2   8x16mm    Front Diff                  1    DTXC1585
2   8x16mm    Rear Diff                   1    DTXC1585
2   5x11mm    Fr Gearbox                  1    DTXC1547
2   5x11mm    Rear Gearbox                1    DTXC1547
2   13x19mm   Rear Hubs                   1    ARZC2636
2   8x16mm    Rear Hubs                   1    DTXC1585
2   13x19mm   Front Hubs                  1    ARZC2636
2   8x14mm    Front Hubs                  1    DTXC1583
4   5x8mm     Steering                    2    DTXC1523

Additional information

Weight 6.1 lbs
Dimensions 17 x 10 x 6 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.