This is the V3 Arrma 2.4GHz Radio Controlled, Brushless Powered, 1/8 scale Ready to Run Talion 6S BLX Speed Truggy with Red and Black Body.
2 in stock (can be backordered)
**Newly Designed Features Include;** Aggressive Low-Profile Body with Multi-Element High-Downforce Wing Low-Profile Wing Mount Low-Profile dBoots Katar Tires Wheels Designed for On-Road Speed as well as Offroading New Shocks with 4mm Shafts Lower Shock Towers for Less Drag Larger Radio Box Shares Battery Tray, Battery Box and adlustable Body Mounts with the Outcast 6S Stronger Bulkheads Stronger Front and Rear Braces Stiffer Servo Mount
FEATURES: Chassis: 0.12" (3mm) thick aluminum Drive: Four wheel with CVD driveshafts Radio: Tactic TTX300 2.4GHz 2-channel with SLT (Secure Link Technology) for unbreakable link between transmitter and receiver ADS15M waterproof metal gear steering servo, TE326 receiver Motor and ESC: BLX185 Brushless Power System, 2050Kv brushless motor, with etched aluminum finned motor can for efficient heat dissipation, gold connectors, 13T pinion gear installed on motor, 20T included in box ESC: 150A waterproof ESC with XT90 battery connector, cooling fan, bridge connector for use with single 4S or 6S packs Shocks: with 4mm diameter shafts Shock Towers: New low-profile 0.20" (5mm) thick aluminum Suspension: Pillow ball with anti-roll bar Body: Newly designed low profile with multi-element high-downforce wing Motor Mount: Aluminum Battery Holder: Adjustable hook and loop straps Tires: Low profile dBoots Katar Wheels: Black Turbo-Fan, 17mm hex Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Warranty: Two year limited warranty beginning at date of purchase INCLUDES: RTR Talion 6S BLX Speed Truggy with 2.4GHz Radio, Brushless Motor, 13T Pinion Gear, ESC, Painted Body, Instruction Manual REQUIRES: AA Batteries: Four for transmitter LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90 connector, Duratrax 11.1V 5000mAh 35C batteries (DTXC1969) recommended Battery Charger: To match selected battery LiPo charging sack, building & track equipment SPECS: Vehicle- Length: 21.7" (550mm) Width: 16.2" (412mm) Height: 7.1" (180mm) Wheelbase: 14.9" (378mm) Weight: 8.8lbs (4kg) Body- Length: Width: Height COMMENTS: For replacement ball bearings use: Qty. Size Location Qty. Bearing Set 2 15x21mm F&R Inner Hubs 1 ARAC3162 2 8x16mm F&R Inner Hubs 1 ARAC3156 2 5x10mm Idler Gear 1 ARAC3200 2 5x10mm Input Shaft 1 ARAC3200 2 10x15mm Diff Gear 1 ARAC3202 6 8x16mm Fr, Ctr & R Diffs 3 ARAC3156 The BLX185 ESC was set from factory to default to a LiPo battery mode. If any adjustments such as recalibration were made, check to see that the battery mode has not been inadvertently set to NiMH mode. Follow these steps to verify battery mode; 1. Raise the vehicle chassis so that the wheels are not touching anything. 2. With the battery or batteries charged and connected to the vehicle's ESC leads, switch on the transmitter and then switch on the vehicle. If a green LED flashes once the ESC is in LiPo mode. If there is no LED flash on the ESC, and a pulsing noise is made by the motor, the ESC is in NiMH mode. If you intend to use LiPo batteries DO NOT operate ESC in NiMH mode, the batteries may be damaged. To switch ESC from NiMH mode to LiPo mode perform the following steps; 1. Connect battery, switch on transmitter, press and hold set button and turn on ESC. The red LED will flash. 2. Keep holding set button until green LED flashes. The number of flashes represents the variable number of attributes being programmed. 3. To enter the battery mode programming function, release the set button when one green LED flashes. 4. Press the set button to change battery mode between LiPo and NiMH. One RED LED flash indicates ESC is set to LiPo mode. 5. To save setting, switch ESC off.