This is the 1/8 scale Electric Powered, Radio Controlled EB48.4 Competition Buggy Kit.
1 in stock (can be backordered)
FEATURES: Chassis: 7075 aluminum 0.16" (4mm) thick Drive: Four wheel, front and rear universal driveshafts, tapered aluminum center driveshaft Differentials: Three fluid filled adjustable Shocks: Oil-filled with CNC machined aluminum bleeder shock caps that can be used to build vented or non-vented shocks (optional bladders required for non-vented shocks), 4mm steel shafts, CNC 4×1.9 Flat/Flat Delrin Pistons, and CNC Delrin Guides, new low frequency shock springs, tall clamping spring perches with captured shock boots Steering: Revised geometry and Ackermann plate, response and durability improved with new bearing supported spindles and spindle carriers, reduced wheel offset for better performance in corners adjustable Ackermann and bump-steer, Ackermann refers to the effect of the inner front wheel rotating faster that the outer front wheel during turns, optional solid right bell crank for increased response Body: Clear polycarbonate, fighter jet inspired with more internal clearance, small rear spoilers increase downforce, with with adjustable low center of gravity lightweight mount Suspension: Revised wide rear pivot suspension geometry Motor Mount: 2-piece CNC aluminum with dual clamping gear mesh adjustment, direct-to-diff mounting Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: EB48.4 Competition Buggy Kit with Clear Body, Shocks, Decals, Window Mask Sheet, Rear Wing, Shock and Diff Oil, Instruction Manual REQUIRES: Radio: 2-channel with high-torque steering servo Motor and ESC System: For 1/8 scale buggy Tires and Wheels: For 1/8 scale buggy Pinion Gear: MOD1 15-25 tooth pinion (TKR4175-TKR4185) LiPo Battery: 4-6S (4S at least 5000mAh) Battery Charger, Charging Bag, Paint, CA Glue, tools, building and track equipment SPECS: Vehicle- Length: 17.1" (435mm) without wing Width: 12 - 12.2"* (306-310mm*) *optional hubs required Weight: 7.0lbs (3200g) Internal Gear Ratio: 3.33:1 Diff Ratio: F/R - 12/40t, center 44t Battery Tray Dimensions: 1.97x5.8" (50x148mm) 2x2s or 1x4s config Body- Length: 13.3" (338mm) Width: 5" (127mm) Height: 3.5" (89mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x16mm Front Diff 1 DTXC1585 2 8x16mm Center Diff 1 DTXC1585 2 8x16mm Rear Diff 1 DTXC1585 2 5x11mm Front Gearbox 1 DTXC1547 2 5x13mm Rear Gearbox 1 ARZC1023 2 8x16mm Front Hubs 1 DTXC1585 2 13x19mm Front Hubs 1 TKRC3194 2 8x16mm Rear Hubs 1 DTXC1585 2 13x19mm Rear Hubs 1 TKRC3194 2 6x10mm Steering 1 DTXC1561 4 5x8mm Steering 2 DTXC1523