EB410 1/10 4WD Competition Electric Buggy Kit

$399.99 price_excluding_tax

This is the Radio Controlled, Electric 
Powered, 1/10 Scale EB410 Competition 
Buggy Kit from Tekno RC.

Available on backorder

SKU: TKR6500 Categories: , , Tags: , , , , , , , ,

Description

FEATURES: Chassis: Aircraft-grade 7075 hard anodized aluminum, battery, ESC,   
            RX sit 1.5mm below top surface for lower center of gravity         
          Drive: Four wheel shaft, bearing captured CVA system transfers power 
            to the wheels, 6mm diameter hardened steel stub axles              
          Differentials: Three, planetary gear                                 
          Suspension: Oil-filled shocks with front and rear sway bars          
          Shocks: Oil-filled 13mm Big Bore, 3.5mm shafts, compact cartridge    
            with low profile shock caps for class leading suspension travel    
          Shock Towers:                                                        
          Steering: Reverse bellcrank for smoother response and more           
            consistency through turns                                          
          Motor Mount: Two-piece, low center of gravity design                 
          Caster: Adjustable, caster/toe-in refers to the angle of the front   
            suspension when viewed from the side of the car in relation to     
            the chassis                                                        
          Camber: Adjustable front and rear, camber refers to the angle of the 
            tops of the tires from vertical when viewed from front or behind   
            vehicle                                                            
          Ackerman: Adjustable, Ackerman describes the effect of the inside    
            front wheel turning faster than the outside front wheel during     
            turns                                                              
                                                                               
INCLUDES:                                                                      
                                                                               
REQUIRES: Radio: 2-channel                                                     
          Steering Servo: Low profile or standard size high torque servo with  
            at least 150 oz/in of torque                                       
          Motor and ESC: 1/10 scale buggy                                      
          Battery: 7.4V 2S LiPo shorty configuration                           
          Battery Charger: Compatible with selected battery                    
          Wheels and Tires: 1/10 scale 4x4 buggy                               
          Pinion Gear: 48P, 15-30 teeth                                        
          LiPo Charging Bag, Tire Glue, Paint, Tools, Building and Track       
            Equipment                                                          
                                                                               
SPECS:    Length:                                                              
          Width:                                                               
          Height:                                                              
                                                                               
COMMENTS: For Replacement Ball Bearings use:                                   
            Qty.  Size      Location                  Qty. Bearing Set         
             4  4x7x2.5mm   Steering                   2    DTXC1507           
             2  5x11x4mm    Front Bulkhead             1    DTXC1547           
             2  10x15x4mm   Front Bulkhead             1    DTXC1595           
             2  5x11x4mm    Rear Bulkhead              1    DTXC1547           
             2  10x15x4mm   Rear Bulkhead              1    DTXC1595           
             2  10x15x4mm   Front Hubs                 1    DTXC1595           
             2  6x12x4mm    Front Hubs                 1    DTXC1569           
             2  10x15x4mm   Rear Hubs                  1    DTXC1595           
             2  6x12x4mm    Rear Hubs                  1    DTXC1569           
             2  10x15x4mm   Ctr Diff Assembly          1    DTXC1595

Reviews

There are no reviews yet.

Be the first to review “EB410 1/10 4WD Competition Electric Buggy Kit”

Your email address will not be published. Required fields are marked *