E2017 MGT7 1/8 GT On-Road Nitro Kit

$599.99

This is the Radio Controlled, Glow Powered, 1/8 scale
MGT7 On-Road GT Car Kit from Mugen.

Available on backorder

SKU: e2017 Category: Tags: , , ,

Description

TECH NOTES

            This is the Radio Controlled, Glow Powered, 1/8 scale              
                      MGT7 On-Road GT Car Kit from Mugen.                      
                                                                               
FEATURES: Chassis: A7075 aluminum, 0.12" (3mm) thick                           
          Drive: Four wheel with CVA driveshafts                               
          Differentials: Oil-filled straight cut 12T bevel gears, 42T conical  
            gears                                                              
          Shocks: 16mm oil-filled, hard anodized bodies, specially designed    
            springs, 3.5mm diameter shafts                                     
          Shock Towers: A7075 aluminum, 0.16" (4mm) thick                      
          Suspension: 0.20" (5mm) thick A7075 aluminum lower mounts for        
            optimized geometry                                                 
          Transmission: 2-speed, fully adjustable                              
          Clutch: 3-shoe aluminum type with 2-speed clutch bell                
          Fuel Tank: 5.07oz (150cc)                                            
          Front Bumper: Plastic with foam protector                            
          Camber Tie Rods: Adjustable, Camber describes the angle at which the 
            tires sit vertically                                               
          Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which   
            the tires point inward as viewed from above                        
          Body Mounts: Adjustable to allow fitting of most 1/8  scale on-road  
            bodies                                                             
                                                                               
INCLUDES: MGT7 On-Road GT Car Kit with Instruction Manual                      
                                                                               
REQUIRES: Radio: 2-channel with high-speed steering servo                      
          Engine: .21 cu in non-pull start on-road type                        
          Tires: 1/8 scale on-road with foam inserts                           
          Wheels: 1/8 scale on-road type                                       
          Receiver Battery: 4.8-7.4V flat or hump NiMH or 1600-2100 LiPo pack  
          Body: 1/8 scale touring car                                          
          Fuel, starter box, maintenance and track equipment                   
                                                                               
SPECS:    Length: 19.4" (494mm)                                                
          Width: 12" (305mm)                                                   
          Weight: 7.9 lbs (3600 g) approximate                                 
          Gear Ratio: 1st 11.43, 2nd 8.47                                      
                                                                               
COMMENTS: For Replacement Ball Bearings use:                                   
            Qty.  Size      Location                  Qty.  Bearing Set        
             2   8x16mm    Front Diff                  1      DTXC1585         
             2   8x16mm    Rear Diff                   1      DTXC1585         
             2   8x16mm    Front Gearbox               1      DTXC1585         
             2   8x16mm    Rear Gearbox                1      DTXC1585         
             2   8x16mm    Front Uprights              1      DTXC1585         
             2   15x21mm   Front Uprights              1      DTXC1601         
             2   8x16mm    Rear Uprights               1      DTXC1585         
             2   15x21mm   Rear Uprights               1      DTXC1601         
             4   6x10mm    Steering                    2      DTXC1561         
             3   8x16mm    2 Sp Gear                                           
             2             2 Sp Gear size not given, Mugen part #H0608         
             2   5x10mm    Clutch Bearing              2      DTXC1535         
                                                                               
                                                                   jxs 05/21/15
 
BOX DIMENSIONS:   10.88" W. X   6.50" H. X  19.50" L.
BOX WEIGHT:    7.85 LBS.

Additional information

Weight 7.85 lbs
Dimensions 20 x 10 x 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.