E2015 MBX7R 1/8 Nitro Buggy Kit (Off-Road)


This is the Radio Controlled, Glow Powered, 1/8 scale
MBX7R 4WD Racing Buggy Kit from Mugen.

Available on backorder

SKU: e2015 Category: Tags: , , ,



            This is the Radio Controlled, Glow Powered, 1/8 scale              
                    MBX7R 4WD Racing Buggy Kit from Mugen.                     
FEATURES: Chassis: A7075 hard anodized aluminum, 0.12" (3mm) thick             
          Drive: Four wheel with universal drive shafts                        
          Differentials: Planetary geared with straight cut conical and ring   
          Gearbox: Sealed, front and rear                                      
          Transmission: Single-speed                                           
          Shocks: Oil-filled 0.63" (16mm) diameter hard anodized aluminum      
            bodies, with 0.14" (3.5mm) diameter shafts                         
          Shock Towers: A7075 aluminum, front, 0.20" (5mm) thick, rear         
            0.16" (4mm) thick                                                  
          Steering: Fully adjustable with new geometry and servo saver,        
            trailing front axle position for better steering and overall feel  
          Ackerman: Adjustable, new steering Ackerman plate offers additional  
            steering tie rod holes for maximum adjustability, Ackerman refers  
            to the effect of the inside front wheel turning faster than the    
            outer front wheel during turns                                     
          Body: Clear, cab forward design with high-downforce wing             
          Wing Mount: New design allows wing to be moved closer to shock tower 
            for better traction and jumping                                    
          Brake: Dual disc                                                     
          Spur Gear: Lightweight 46T                                           
          Clutch Bell: 13 tooth steel                                          
          Clutch Shoes: Three hardened aluminum, EO710                         
          Front Suspension: Shortened upper arm for more camber adjustability  
            and the use of the E0161 spacer between the pillow ball and upper  
          Fuel Tank: Approximately 4oz (120cc), redesigned baffle to increase  
            fuel pick up and keep clunk positioned correctly                   
          Camber Tie Rods: Adjustable, Camber describes the angle at which the 
            tires sit vertically                                               
          Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which   
            the tires point inward as viewed from above                        
INCLUDES: MBX7R 4WD Racing Buggy Kit with Shocks, Body, Wing, Instruction      
            Manual, Shock and Diff Oil                                         
REQUIRES: Radio: 2-channel with high-torque steering servo                     
          Engine: .21 class rear exhaust                                       
          Exhaust: Tuned pipe and manifold                                     
          Receiver Battery: 6V flat, at least 1500mAh                          
          Tires: 1/8 scale buggy with foam inserts                             
          Wheels: 1/8 scale buggy                                              
          Fuel, glow starter, building and track equipment                     
SPECS:      Vehicle-                                                           
          Width: 12.2" (309mm)                                                 
          Wheelbase: 12.4 - 12.6" (315 - 320mm adjustable)                     
          Gear Ratio: 11.98:1                                                  
          Length: 13" (330mm)                                                  
          Width:  7.9" (200mm)                                                 
          Height: 3.7" (94mm)                                                  
COMMENTS: For replacement Ball Bearings use:                                   
            Qty.  Size      Location            Qty.  Bearing Set              
             2   8x16mm    Front Diff            1     DTXC1585                
             2   8x16mm    Rear Diff             1     DTXC1585                
             2   8x16mm    Center Diff           1     DTXC1585                
             2   8x16mm    Front Gearbox         1     DTXC1585                
             2   8x16mm    Rear Gearbox          1     DTXC1585                
             4   8x16mm    Front Uprights        2     DTXC1585                
             4   8x16mm    Rear Uprights         2     DTXC1585                
             4   6x10mm    Steering              2     DTXC1561                
             2   5x10mm    Clutch Bell           1     DTXC1535                
BOX DIMENSIONS:   10.88" W. X   6.50" H. X  19.50" L.
BOX WEIGHT:    8.05 LBS.

Additional information

Weight 8.05 lbs
Dimensions 16 x 12 x 10 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.