DIDDIDC0042 1/18 MT4.18 RTR 2.4GHz w/Battery & Charger

$99.98 price_excluding_tax

This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR MT4.18 Monster Truck from Dromida.

1 in stock (can be backordered)

Description

This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR MT4.18 Monster Truck from Dromida.

FEATURES: Chassis: Plastic tub
Drive: Four wheel, shaft driven
Motor: M370 super high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
2-in-1 waterproof ESC/receiver, waterproof steering servo
Battery: 7.2V 1300mAh NiMH
Battery Charger: AC wall type
Suspension: Fully adjustable independent
Shocks: Oil-filled big bore composite body, with multiple mounting
locations
Bumpers: Flexible plastic, front and rear
Ball Bearings: Full set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with offroad tread, gray plastic
wheels, width: 1.2″ (29.5mm), outer diameter 2.5″ (65mm), hex size
0.31″ (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Ninety day limited beginning at date of purchase

INCLUDES: RTR MT4.18 Monster Truck with 2.4GHz Radio, Brushed Motor,
Printed Body, four AA Batteries, 7.2V Battery, AC Wall Charger,
Instructions

SPECS:      Vehicle;
Length: 10.6″ (270mm)
Width:   7.5″ (190mm)
Height:  4.3″ (110mm)
Gear Ratio: 10.4:1
Body;
Length:  9.8″ (250mm)
Width:   3.7″ (95mm)
Height:  2.5″ (65mm)

COMMENTS: For Replacement Ball Bearings use:
Qty.  Size         Location           Qty.     Bearing Set
2   8x12mm      Fr Diff               1        DTXC1581
2   8x12mm      Rear Diff             1        DTXC1581
2   6x10mm      Driveshaft            1        DTXC1561
1   8x12mm      Driveshaft            1        DTXC1581
4   8x12mm      Front Uprights        2        DTXC1581
4   8x12mm      Rear Uprights         2        DTXC1581

For increased speed Dromida offers a Brushless Conversion Kit
(DIDC1150) that includes a Brushless Motor, 25A ESC and other
upgraded components. The Dromida 2S 7.4V 1600mAh Battery
(DIDC1134) is recommended for best results and highest speed with
this conversion kit.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
Low Voltage Cutoff, and will damage the LiPo battery.

Additional information

Weight 4.53 lbs
Dimensions 17.00 x 11.50 x 5.38 in

Reviews

There are no reviews yet.

Be the first to review “DIDDIDC0042 1/18 MT4.18 RTR 2.4GHz w/Battery & Charger”

Your email address will not be published. Required fields are marked *