AX90056 1/10 Wraith Spawn Electric 4WD Kit

$349.99 $279.99

AX90056 1/10 Wraith Spawn Electric 4WD Kit

Available on backorder

SKU: AX90056 Category: Tags: , , , , ,


This is the radio controlled, electric powered, 1/10 scale
Wraith Spawn Rock Racer Kit from Axial.

FEATURES: Chassis: Full tube composite construction with composite skidplate
Drive: Four wheel shaft with WB8 HD Wildboar 3-piece driveshafts
with captured cross pin design eliminating older set screw design
hardened steel universal joints increase steering angle by 10°
over stock dogbone/drive cup setup
Axles: AR60 OCP (Off-Center-Pumpkin) high-strength composite design
Transmission: Steel output gears and dual slipper clutch equipped
Differentials: Locked type with easy access for rebuilding and
Spur Gear: Molded composite plastic 32 pitch, 56 tooth
Suspension: Four link optimized to reduce axle steer, machined
aluminum lower suspension links reduce flex and provide precise
control over rough terrain
Shocks: Icon Vehicle Dynamics aluminum body
Receiver Box: Waterproof
Cockpit: Lexan interior with molded driver figure
Battery Tray: Sized for 6-cell 7.2V standard stick packs or 2S LiPo
pack up to 1.8″ (47mm) wide, 5.9″ (150mm) long, 1.1″ (28mm) high
Tires: 2.2″ (56mm) diameter Maxxix Trepador in S30 compound and
multi-stage staggered shoulder pattern for improved control, foam
inserts also included
Wheels: Three piece Method IFD 12 spoke beadlock with updated hub
adapter that uses standard 12mm hex
Body: Clear polycarbonate Wraith Spawn
Warranty: Axial warrants this kit to be free from defects in
materials and workmanship when new. This warranty does not cover
damages due to normal wear and tear, user’s failure to perform
routine mantenance, user error of assembly or installation, user
modifications, addition of aftermarket parts or option parts.

INCLUDES: Wraith Spawn Rock Racer kit with Cockpit, Tires, Wheels, Foam
Inserts, 56T Spur Gear, 12T Pinion Gear, Shocks, Body, Window Masks
Decals and Instruction Manual

REQUIRES: Radio: 2-channel
Servo: High-torque, standard size
ESC: Axial AE-2 recommended
Motor: 540 size
Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: For selected battery type
AA Batteries: Four or eight depending on selected transmitter
Building and trail equipment

SPECS:      Vehicle;
Wheelbase: 13.9″ (353mm)
Width:     11.02″ (280mm)
Height:    9.1″   (232mm)
Length:    19.25″   (490mm)
Ground Clearance: 2.8″ (72mm)
Weight: 5.45lbs (2.47kg) with electronics
Length: 18.1″ (461mm)
Width:   8.3″ (211mm)
Height:  6″   (152.4mm)
Thickness: .040″ (1.02mm)

COMMENTS: For Replacement Ball Bearings use:
Qty.  Size      Location                  Qty. Bearing Set
2  10x15x4mm  Fr Diff                     1    DTXC1595
2  10x15x4mm  Rear Diff                   1    DTXC1595
4  5x11x4mm   Fr Axle/Uprights            2    DTXC1547
2  10x15x4mm  Fr Axle/Uprights            1    DTXC1595
2  5x11x4mm   Rear Axle                   2    DTXC1547
4  5x10x4mm   Gearbox                     2    DTXC1535
1  8x16x5mm   Gearbox                     1    DTXC1585
1  15x21x4mm  Gearbox                     1    DTXC1601
1  5x11x4mm   Gearbox Output Shaft        1    DTXC1547

BOX DIMENSIONS: 11.63″ W. X 8.13″ H. X 24.13″ L.

Additional information

Weight 10 lbs
Dimensions 24 x 20 x 20 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.