SC10 Setup Tips

SC10 Setup Tips

SC10 Setup Tips

Team Associated did a much needed redesign of their website a few months ago. One practical improvement was that they made the Setup Sheets easy to find for the SC10.

In an organized table, they have listed a link to download the Setup Sheet, the name of the driver, the track the setup was used on, and the conditions of the track. They have SC10 setup tips for just about any racing surface.

If you need some SC10 setup tips, go here!

SC10 RTR

SC10 Ready-To-Run

Finally, you can now have Team Associated’s world-class performance with true scale authenticity in a 1:10 scale ready-to-run electric truck! Team Associated is proud to bring to you the SC10, a 1:10 scale electric 2WD off road, authentic short course race-truck that is ready-to-run.Based on the 6-time ROAR Nationals-winning RC10T4, the engineers behind the doors in Area 51 made the SC10 both all show and all go!

The SC10 comes ready-to-run with a factory finished short course race-truck body, short course style wheels and aggressive tread multi-terrain tires, all which have been designed to look just like the full-size race trucks that run in short course off-road series around the country. The world of high-performance 1:10 scale electric R/C has never before seen this level of scale accuracy! At first glance it’s easy to see that the SC10 is another champion by design!

Magazine Reviews
A huge number of Team Associated fanatics have added an SC10 to their collection, and I think that any newbie who picks the SC10 RTR off the shelves will be an instand AE fanatic. This RTR offers great handling and lots of tunability, and it has a great stock electronics package for tracks that offer spec-style racing. All this at a cost of around $230!
–RC Driver, September 2010
Matt Higgins: As a racer, I knew I’d like the SC10. The parts fit and finish are exceptional. Outfitted with a brushless 17.5-turn motor and a 7.4 LiPo, I know I’m driving the future of off-road racing. Paul Onorato: Scale appearance from its great-looking body and realistic tire and wheel package down to its cool mud flaps hanging off the back bumper make the SC10 hard to resist. Kevin Hetmanski: Out of the box it feels good on a track, and there are lots of tuning options to gt the most out of the truck and lower your lap times.
–Radio Control Car Action, October 2009

Lucas Oil Off Road Racing Series

Features

  • Built on the 6-time National Champion RC10T4 platform
  • Authentic short course replica racing truck body
  • Short course style wheels and aggressive tread multi-terrain scale tires with reinforced sidewalls
  • Realistic bumpers front and rear for maximum durability
  • Durable front and rear body mounts
  • 14 rubber-sealed ball bearings
  • Rugged steel turnbuckles for quick and easy suspension adjustments
  • AE logo mud flaps
  • 2.6:1 ratio gearbox equipped with sealed gear differential
  • Efficient dual-sided, externally adjustable slipper clutch
  • Molded composite low-CG chassis
  • Hinged battery hold-down strap fits NiMH and LiPo battery packs
  • Set-screw secured antenna tube
  • Fully adjustable suspension geometry
  • Angled bellcrank coplanar steering with integral servo saver
  • Vertical ball end roll-center adjustments front and rear
  • Blue aluminum shock bodies
  • Steel rear dogbone drive shafts
  • XP2 radio system with metal gear steering servo
  • XP SC200 digital electronic forward/reverse speed controller with optional LiPo low voltage cutoff and optional reverse lockout
  • Reedy 17-turn motor
  • Many Factory Team and Reedy option parts already available!

Part #: 7029  — Team Associated/RC10.COM

7030  — KMC Wheels/RC10.COM

Take a Closer Look

Associated SC10 Beginner’s Buying Guide

Associated SC10 Beginner’s Buying Guide

Buying your first RC car can be intimidating and if you don’t know what you need, you could make some costly mistakes. In this recently updated guide, we are going to tell you exactly what you need to get started with the Team Associated SC10.

Here are the components you need to get your SC10 race-ready.

1. SC10 RTR Kit

SC10 Brushless RTR Kit

The SC10 Brushless RTR Kit comes with everything you need to start bashing, and almost everything you need to start racing. The RTR kit includes: SC10 Truck (assembled), XP3-SS 2.4GHz 3-channel radio system, XP SC450-BL Brushless ESC with LiPo cutoff, and Reedy 3300kV Brushless Motor.

The SC10 Brushless RTR is the most economical way to get started with the SC10.

2. Lipo Battery for SC10

Dynamite 6000mah LipoDynamite 6000 mah Lipo
Dynamite 4200mah LipoDynamite 4200 mah Lipo

LiPo Battery – LiPo batteries are one of the best things that has ever happened to the RC hobby. LiPo batteries give you more power, more runtime, and have a longer life. Do yourself a favor and spend the extra money to get a LiPo Battery.

Get the Dynamite 6000 mah Lipo if you want a great value and lots of run time.

Get the Dynamite 4200 mah Lipo if you want to save a little money.

See LiPo Battery and Charger Setup for SC10 for more info.

3. Lipo Battery Charger

Dynamite AC/DC Lipo ChargerDynamite AC/DC Lipo Charger

LiPo Battery Charger – LiPo batteries require a charger that is specifically designed to charge LiPo batteries. We highly recommend the AC/DC LiPo charger from Dynamite. The Dynamite AC/DC Lipo Charger can charge through any electrical outlet or it can be powered by a car battery.

4. SC10 Off-Road Tires

The SC10 RTR comes with tires that will only perform well on high traction surfaces like pavement or carpet. I have seen many newbies come to race with their stock SC10 tires and their truck is almost impossible to drive.

At the very least, you need to get soft rear tires. Depending on the track surface and your budget, you may need softer fronts as well. Here are some great tire options for your SC10:

Pro-Line Caliber M4Pro-Line Caliber M4
JConcepts SubculturesJConcepts Subcultures
JConcepts GoosebumpsJConcepts Goosebumps

See Hop-up Tires for the SC10 for more info.

5. SC10 Toolbox Essentials

If you don’t have any tools, we recommend your invest in some if you can. The SC10 RTR kit does come with hex wrenches and nut drivers, but they are cheap. If you can get a set of semi-quality hex wrenches and nut drivers, it will make working on your SC10 alot easier (not to mention less stripped screws).

6. Double AA batteries

You need eight (8) double AA batteries to power the 2.4g radio that comes with the SC10 RTR. If you have the extra cash, I recommend getting some rechargeable Energizers and a double AA battery charger.

These six products will start you off with a quality set up that can bash up your backyard or tear up your local track. If you want to upgrade to a faster motor, check out SC10 Brushless Motor Setups for more info.

Why Short Course Trucks are great for beginners (or anyone!)

Short Course racing has taken local tracks and backyards by storm and for good reason. Short Course trucks have bigger tires and bigger bodies that make for exciting, realistic racing and bashing. Compared to traditional RC off-road truggies and buggies, Short Course Trucks can handle more contact without spinning out or flipping over. If you are especially interested in racing, most local tracks have a 2WD Short Course class, but you should check with your local track to be sure.

Why buy the Team Associated SC10 over the Traxxas Slash

Whether you want to race at your local track or bash in the backyard, the SC10 is a great RC truck for beginners and experienced hobbyists wanting to join the Short Course action. The reason we like the SC10 and encourage others to buy it is it’s combination of durability and racing build. We have been racing our SC10 for a year now and its durability has been comparable to any Traxxas Slash we have seen. As for racing ability, the SC10 lighter and more agile than the Slash allowing for faster speed, better cornering, and more tuning options. I’m not saying you can’t be a race winner with a Slash (the local Traxxas pro kicks my ass!), but from my experience, the SC10 is the faster truck.

How to Remove and Replace (or Upgrade) your SC10 Steering Servo

How to Remove and Replace (or Upgrade) your SC10 Steering Servo

How to Remove the SC10 Steering Servo

Removing the steering servo from your SC10 is actually a fairly simple process. All you have to do is pull out the two hex screws from the bottom of your SC10 chassis, located directly below your steering servo. Then, pull the servo horn from the ball cup attached to the steering rack.

The servo horn can be removed by taking out the phillips head screw and pulling it off of the servo gear. Watch the video below (by RCNightmare.com) and use your SC10 manual to see exactly how to remove your steering servo and to replace it with a new part.

Our SC10 Steering Servo Recommendations

Depending on your budget, here are two steering servos that we recommend that would make for a great replacement or upgrade for your SC10:

 

Watch the video below to learn how to remove and replace the SC10 steering servo…

 http://www.youtube.com/watch?feature=player_embedded&v=9upeZe004EA

Losi SCTE Parts/Hop-ups

LOSB7018 Wheel Set (2):TEN-SCTE
LOSB3436 40T Spur Gear, Mod 1: TEN-SCTE
LOSB2414 Body Posts: TEN-SCTE
LOSB2417 Rear Bumper Pack: TEN-SCTE
LOSB0127 TEN-SCTE 4WD Short Course Rolling Chassis
TLR8060 Hi Performance SCT Body: XXX-SCT, SCTE
LOSB2421 Front Bumper Pack: TEN-SCTE
LOSB0128 1/10 TEN-SCTE 4WD Short Course Truck RTR
LOSA3574 1.0 Module Pitch Pinion, 14T: 8E,SCTE
LOSB3578 Center Rear Drive Shaft: TEN-SCTE
TLR0901 TLR Tuning Kit: TEN-SCTE
LOSB3493 Aluminum Clamping Wheel Hex (2): TEN-SCTE
TLR6080 Hinge Pin Set, TiNitride (6): SCTE
TLR8061 Hi Performance PRE-CUT SCT Body: 22SCT, SCT, SCTE
LOSB2419 Sideguards: TEN-SCTE
TLR5063 Fr Shock Shaft, TiNitride (2): SCTE
TLR5064 R Shock Shaft, TiNitride (2): SCTE
LOSA3575 1.0 Module Pitch Pinion, 15T: 8E,SCTE
RPM73042 Front Bumper and Skid Plate, Black: Losi SCTE
LOSA3573 1.0 Module Pitch Pinion, 13T: 8E,SCTE
LOSB3574 Axle (2): TEN-SCTE
LOSA3576 1.0 Module Pitch Pinion,16T: 8E,SCTE
TLR4000 Tuned Flex Lightened Chassis: TEN-SCTE
LOSB2426 Rear Torque Rod, TLR Chassis: SCTE
LOSB2416 Batt Strap (2): TEN-SCTE
RPM73112 Rear Bumper: Losi Ten-SCTE
LOSB2909 Piston Pack (2), TEN-T/TEN-SCTE
LOSB8028 TEN-SCTE Body, Clear
LOSA3578 1.0 Module Pitch Pinion, 18T: 8E,SCTE
MIP12200 Pro4-Mance Chassis & Tuning Kit: Losi SCTE 4×4
LOSA3572 1.0 Module Pitch Pinion, 12T: 8E,SCTE
AKA23006 CYCLONE SC Wheel: Losi SCTE 4X4
TLR6081 King Pins, Titanium: SCTE
LOSB2415 Batt Tray w/Stop Tab, Foam Pad & Screws: TEN-SCTE
LOSB2359 Radio Tray w/Switch Cvr Blnk & Rx Cvr: TEN-SCTE
LOSA3577 1.0 Module Pitch Pinion, 17T: 8E,SCTE
RPM73262 Front A-Arms: Losi SCTE. Ten-T, 810
LOSB3495 Wheel Hex (4) w/Pins: TEN-SCTE
LOSB3494 Wheel Hex Adapter: XXX-SCT to TEN-SCTE
LOSB2418 Rear Mud Flap (2): XXX-SCT/TEN-SCTE
LOSB7024 Beadlock Rings w/Screws, Flor Ylw: SCT/SCB/SCTE(4)
RPM73142 Rear A-Arms: Losi SCTE. Ten-T, 810
RPM73082 Rear Skid Plate: Losi Ten SCTE, Ten-T & 810
LOSB2413 Motor Mount w/Adapter: TEN-SCTE
LOSB3592 Diff Standoff: TEN-SCTE
TLR4004 Servo Saver Tube, Hard Ano: SCTE
LOSA3571 1.0 Module Pitch Pinion, 11T: 8E,SCTE
LOSB2409 Mud Flaps: XXX-SCT, TEN-SCTE
LOSB2412 Top Brace: TEN-SCTE
LOSB2427 Motor Adapter: TEN-SCTE
LOSA3570 1.0 Module Pitch Pinion, 10T: 8E, SCTE
LOSB7020 Beadlock Rings w/Screws, Red: SCT/SCB/SCTE(4)
RCZLOS061 Screw Set: TEN-SCTE
LOSB8044 TEN-SCTE Painted Body, #33 Stephensen Scheme
LOSB2411 Chassis: TEN-SCTE
JCO3352B Hazard Wheel, Black:Losi SCTE,SCTN,22SCT
LOSB7025 Beadlock Rings w/Screws,BlueChrome:SCT/SCB/SCTE(4)
AKA13004SRE CITYBLOCK SC Soft Mnt Red Insert :LOSI SCTE
TLR4003 Titan Screw Kit (148): TEN-SCTE
AKA13003SRE GRIDIRON SC Soft Mnt Red Insert :LOSI SCTE
LOSB7019 Beadlock Rings w/Screws, Chrome: SCT/SCB/SCTE (4)
MIP12132 MIP Bypass1 Kit:Losi TEN-SCTE Truck,12mm Bore Size
LOSB2022 Rear Suspension Mount Cover: TEN-SCTE
AKA13002SRE ENDURO SC Soft Mnt Red Insert :LOSI SCTE
XTR10861 Aluminum Carbon Fiber Chassis Kit: Losi SCTE
XTR10859 Carbon Fiber Center Diff Support Mount,Black: SCTE
LOSB8215 Sticker Sheet: TEN-SCTE
LNS2515 Titanium Turnbuckle Kit: TEN-SCTE
AKA13003VRE GRIDIRON SC Super Soft Mnt Red Insert: LOSI SCTE
XTR10865 Carbon Fiber Battery Strap Kit: Losi SCTE
XTR10864 Carbon Fiber Long Top Plate (2.5mm): Losi SCTE
AKA13004VRE CITYBLOCK SC Super Soft Mnt Red Insert :LOSI SCTE
AKA13001VRE WISHBONE SC Super Soft Mnt Red Insert: LOSI SCTE
JCO2089 4mm Locking Wheel Nut, Blue: TRA, TLR22, SCTE
JCO2090 4mm Locking Wheel Nut, Black: TRA, TLR22, SCTE
AKA13002VRE ENDURO SC Super Soft Mnt Red Insert: LOSI SCTE
JCO3352Y Hazard Wheel, Yellow:Losi SCTE,SCTN,22SCT
AKA13008VRE REBAR SC Super Soft Mnt Red Insert: LOSI SCTE
AKA13001SRE WISHBONE SC Soft Mnt Red Insert: LOSI SCTE
JCO3352W Hazard Wheel, White:Losi SCTE,SCTN,22SCT
AKA13008SRE REBAR SC Soft Mnt Red Insert :LOSI SCTE
XTR10850ALO Aluminum Front Shock Tower, Orange: 810, TEN-SCTE
XTR10858 Carbon Fiber Transponder Mount, Black: SCTE
RCZLOS061M Screw Set (Metric): TEN-SCTE
XTR10850ALBK Aluminum Front Shock Tower, Black: 810, TEN-SCTE
XTR10863 Carbon Fiber Short Top Plate (2.5mm):Losi SCTE
XTR10851ALBK Aluminum Rear Shock Tower, Black: 810, TEN-SCTE
XTR10862 Carbon Fiber Battery Strap: Losi SCTE
XTR10851ALO Aluminum Rear Shock Tower, Orange: 810, TEN-SCTE

High Traction Setup

SC10 High Traction Setup and Tuning

SC10 Indoor High Traction Setup

Winter is around the corner and for many RC’ers that means indoor racing. Many indoor tracks are high traction and well maintained. If your SC10 is set up for a loose and bumpy outdoor track, there are a few tuning adjustments you can make that will improve the performance of your truck on high-bite surfaces.

The SC10 comes with tons of steering out of the box. If you race on a loose surface, you have given up much of this steering in favor of rear traction. When moving from a loose track to a high-traction track, you do not need as much rear traction. This allows you to tune your truck for more steering.

Here are a few tuning tips for adding more steering to your SC10:

  1. If you have added anti-squat, get rid of it!Anti-squat is a simple way to tune out steering and tune up rear traction. If you have added anti-squat to your SC10, remove it and you SC10 will steer better. Read Add Anti-Squat (Kick-up) to the SC10 for more info.
  2. Move your battery upMoving the battery is one of the easiest way to quickly tune your SC10. Moving the battery towards the front of the truck will increase steering and help keep the nose down in the air.
  3. Try a rear sway barA Rear Sway Bar will reduce “roll” on your SC10 while turning. The effect is less rear traction and more front steering. On a high traction track, this could be a big advantage.

    Associated makes a Rear Sway Bar Kit that is available at Mike’s.

  4. Install softer springs in the front, or harder springs in the rearGoing to softer springs in the front will give you more front steering and less rear traction. Adding harder springs in the back will have a similar effects. Experiment with both of these tuning adjustments to find which one works best for your track
  5. Change your tiresIf you are running off-road tires on your SC10, you will want to make a change. If you don’t want to buy new tires and wheels, try switching back to the stock tires that came with the SC10.
  6. Put black grease in your rear differentialIf you are running diff oil in your rear differential, think about going back to the stock black grease that came with your SC10. The black grease will promote more differential action which will help your truck make sharper turns.

    If you have a ball differential, try loosening it for more diff action.

Chris, emailed us with these additional tips for indoor racing:

  • Try the Slash front sway bar for additional stability.
  • If your ESC has a drag break feature, try turning it up. This will allow you to stay in the throttle longer when going into sharp turns. If you are having trouble spinning out going into turns then try turning the drag break down.
  • Lower your center of gravity by removing pre-load spacers from the shock bodies. This will give you more overall stability and an edge over higher center of gravity trucks like the slash.
  • Adjust your slipper clutch. When running on a loose track, you can keep the slipper very tight without risking damage to the drive train. On a high traction track, you will be placing much more stress on the drive train and a properly tuned slipper will reduce the risk of tranny gear failure.

Axial R/C

AXIAL

EXO 

  • Product_exortr_800x533 AX90024
    EXO – 1/10th Scale Electric 4WD Terra Buggy – RTR

    The EXO™ Terra Buggy RTR builds on the EXO™ kit version which features a variety of fully licensed, realistic features including a licensed Griffin radiator, licensed Hankook Dynapro MT tires and Raceline Renegade wheels. To meet the demands of today’s performance thirsty drivers, Axial worked with Castle Creations to develop a brushless system that had power and the ability to handle popular 3S Lipo battery packs (*battery not included) for an incredible, high performance experience right out of the box. At the end of th…

    PRODUCT INFO

  • Product_exokit_800x533 AX90015
    Axial EXO – 1/10th Scale Electric 4WD Terra Buggy- Kit

    The Axial EXO™ Terra Buggy Born out of the desert, the worlds harshest terrain, ready to hit any terrain you throw at it with all-out, high speed performance! The Axial EXO Terra Buggy is tons of FUN with the ability to tame even the harshest environments, from gritty sand dunes to suspension clapping rough whoops! Yes, we know the EXO does not exist in the full size world, and that is exactly what we intended – TO DREAM BIG, and make it an R/C reality! Axial’s R&D team started with a clean slate and took an in …

    PRODUCT INFO



WRAITH

  • Product_wraithkit_800x533 AX90020
    Axial Wraith 1/10th Scale Electric 4WD – Kit

    The Wraith™ can go in so many directions; desert sand, mountain trail runner, rock racer, mud bogger and any form of backyard bashing that can be dreamed up! The realistic looks, drivability and ready-to-run ease make this vehicle the perfect blank canvas for the enthusiast looking for a vehicle to build upon. The Wraith™ kit is an unassembled version of the Wraith™ RTR. It includes upgraded components which make the Wraith™ kit a solid platform, ready for your electronics, allowing you to build a Wraith™ fo…

    PRODUCT INFO

  • Product_wraithrtr_800x533 AX90018
    Axial Wraith 1/10th Scale Electric 4WD – RTR

    The Wraith™ Ready-to-Run 1/10th Scale Electric 4WD Rock Racer is another “FIRST” for Axial with the first and most realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith™ is built to go fast and is NOT JUST A LOW SPEED ROCK CRAWLER.The Axial Wraith™ changes the game with its impressive 1:1 scale looks, high-speed monster truck “bashability,” and technical “crawl” capabilities. The Wraith™ is the most versatile vehicle satisfying the needs of a wide ra…

    PRODUCT INFO



AX10

  • Product_ax10ridgecrest_800x533 AX90019
    Axial RTC 1/10th Scale Electric 4WD – RTR

    The original AX10™ Scorpion hit the market in April of 2007. It was Axial’s first vehicle which brought crawling to the mainstream and quickly became the most influential crawler in the industry. Since then, Axial has made numerous advancements through a variety of chassis designs which developed new categories within the crawling segment. While the shaft-driven AX10™ chassis made crawling available to the masses, the market was split into two categories; scale and competition. Axial answered both with the d…

    PRODUCT INFO



XR10

  • Product_xr10kit_800x533 AX90017
    Axial XR10 – 1/10th Scale Electric 4WD Rock Crawler Competition Kit

    Complete “no-compromise” competition ready kit; Competition inspired body – design, layout, and size all catered for optimum performance.  Meets all U.S.R.C.C.A minimum requirements

    PRODUCT INFO



SCX10

  • Product_scx10rtr_800x533 AX90022
    Axial SCX10 Honcho 1/10th Scale Electric 4WD – RTR

    The latest SCX10™ is inspired by off-road vehicles that are basically part truck and part buggy, nicknamed “truggies”. The new Axial SCX10™ is the vehicle to have when it comes to having a realistic looking truggy. Scale features such as the steel c-channel ladder frame, plastic molded cage, and plastic front bumper with aluminum skid plates are included. If you’re looking for adventure, the SCX10™ Trail Honcho™ delivers!

    PRODUCT INFO

  • Product_scx10kit_800x533 AX90021
    Axial SCX10 Dingo 1/10th Scale Electric 4WD – Kit

    Get ready to hit the trails now with the new SCX10™ DINGO™ Builders-Kit™ as it features a realistic look and true functional steel C-channel ladder frame with bolt on shock hoops, molded skid plate, and dual spring oil filled shocks. These are just a few of the items that make this one capable off-road truck. The Dingo™ truck body is also specifically designed for the trail because it incorporates a realistic molded roll cage and fender flares which are molded in tough durable composite plastics that will withstand the ab…

    PRODUCT INFO


B4.1 1/10 SCALE 2WD ELECTRIC BUGGY

RC10B4.1 Ready-To-Run Brushless 

Team Associated’s RC10B4 has been proven as a world-class competition buggy with four consecutive IFMAR Worlds Championships and five ROAR National Championships. Equally important are the countless club and regional events that the B4 continues to win.

Designed by the winningest name in R/C, Team Associated now brings you this level of high performance in the new brushless RC10B4.1 RTR. Fully assembled and sharing many of the same components as the RC10B4 Team kit, the brushless RC10B4.1 RTR incorporates upgraded features like a totally new 2.4GHz 3-Channel radio system and SHV1504 MG metal gear steering servo. A Reedy 3300kV brushless motor supplies the power, while the XP SC450-BL electronic speed control with LiPo cutoff provides smooth throttle control. A sealed gear differential improves reliability and allows fine tuning for different surface conditions.

Additional upgrades can be made to your brushless RC10B4.1 using a full line of Factory Team B4 hop-ups, as well as Reedy and LRP performance parts. Drive a genuine Team Associated brushless RC10B4.1 RTR into the winner’s circle today, or chances are you’ll be chasing one!

Magazine Reviews
With any electric vehicle, the ESC handles braking, and the XP SC450BL speed control works well: it’s smooth, progressive and slows up the buggy well for corners. Its important that the buggy stay stable under braking and with the factory set-up, the buggy holds its ground well. The aluminum shocks with stock oil, pistons and springs do an excellent job over just about any type of terrain. The Reedy 3300kv motor is a good performer and has lots of torque in addition to great top end; overall an ideal choice for the B4.1 RTR.
–RC Driver, September 2010
Low-Speed Handling: The buggy really shines here, with geat corner speed and lots of steering. If you follow the setup in the back of the manual, you will find the buggy reacting favorably. High-Speed Handling: This buggy will see some high speeds so it’s important for it to hold its B4.1to increase side bite. With the included gear diff, the need for maintenance has been reduced even more. The B4.1 has almost all the tuning options as the factory kit with the included addition of the gear diff, as well a few more camber link locations in the front and rear that have only been seen recently.
–Xtreme RC Cars, June 2010
Features

  • Built on the 4-time World Champion and 5-time National Champion
  • XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal
  • XP SC450-BL Brushless electronic speed control with LiPo cutoff,
  • Reedy 3300kV brushless motor
  • 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable
  • Molded composite low-CG chassis with set-screw antenna tube lock
  • Blue aluminum shock bodies with molded pre-load clips
  • Battery strap with twist-lock thumb knobs
  • Rugged steel turnbuckles for adjustable camber and front toe-in
  • Angled bellcrank “co-planar” steering with built in servo saver
  • Vertical ball ends for roll center adjustments, front & rear
  • Factory finished Interceptor 2.0 polycarbonate body
  • Pre-mounted tires on white dish wheels


Part #: 9039  — RCB4.1 2.4GHz Brushless

MIP Associated Parts

These are the M.I.P. Parts available for Team Associated vehicles available at Mike’s Hobby


MIP C-CVD™ Kit, Associated GT2 FT Quick Release (2)
8129(Note: will not fit GT2 RTR)
$35.00

MIP C-CVD™ Kit, Associated GT2 FT Quick Release (2)

mip-part-12156.jpg
MIP Hard Coated Aluminum Top Shaft, Associated B4, T4, SC10
12156 
$15.00

MIP Hard Coated Aluminum Top Shaft, Associated B4, T4, SC10


MIP Super Diff Kit, Associated 18T, 18MT, 18B, 18R
1444
$19.95

MIP Super Diff Kit, Associated 18T, 18MT, 18B, 18R


MIP C-CVD™ Kit, Associated SC10
9128
$35.00

MIP C-CVD™ Kit, Associated SC10

mip-part-09130e.jpg
MIP Ball Diff Kit, Associated SC10
9130
$40.00

MIP Ball Diff Kit, Associated SC10

mip-part-1445.jpg
MIP Super Diff Rebuild Kit, Associated 18T,MT,18B,18R
1445
$5.00

MIP Super Diff Rebuild Kit, Associated 18T,MT,18B,18R


MIP CVD™ Kit, Associated RC10
1007CLASSIC. You may order, if no inventory we will contact you about this limited item….
$27.50

Result pages MIP CVD™ Kit, Associated RC10


MIP CVD™ Hardware, Associated
1020
$3.95

MIP CVD™ Hardware, Associated


MIP CVD™ Axle, Associated 3/16 RC10T2, GT, B2, B3, T3 (1)
1083CLASSIC.
$8.00

MIP CVD™ Axle, Associated 3/16 RC10T2, GT, B2, B3, T3 (1)


MIP CVD™ Bones, Associated RC10, B2, B3 (2)
1161CLASSIC. You may order, if no inventory we will contact you about this limited item.
$18.95

Result pages MIP CVD™ Bones, Associated RC10, B2, B3 (2)


MIP CVD™ Kit, Associated RC10T, GT Axle
1196CLASSIC. You may order, if no inventory we will contact you about this limited item….
$37.50

Result pages MIP CVD™ Kit, Associated RC10T, GT Axle


MIP CVD™ Kit, Associated RC10 B2, B3
1198CLASSIC. You may order, if no inventory we will contact you about this limited item….

$32.50

Result pages MIP CVD™ Kit, Associated RC10 B2, B3


MIP Drives Kit, Associated 18T, 18MT, 18B (2)
1440
$25.00

Result pages MIP Drives Kit, Associated 18T, 18MT, 18B (2)


MIP Drive Bone, Associated 18T, 18MT, 18B (1)
1441
$6.00

Result pages MIP Drive Bone, Associated 18T, 18MT, 18B (1)


MIP Drive Axle, Associated 18T, 18MT, 18B (1)
1442
$5.00

Result pages MIP Drive Axle, Associated 18T, 18MT, 18B (1)


MIP Drive Rebuild Kit, Associated 18T, 18MT, 18B
1443
$5.00

Drive Rebuild Kit, Associated 18T, 18MT, 18B


MIP Drive Kit, Associated, RC18R (fr/r)
1570
$25.00

Drive Kit, Associated, RC18R (fr/r)


MIP C-CVD™ Kit, Associated B4, B4RS-RTR, B4.1 RTR, B4.1 Worlds( 2)
8125
$32.50

C-CVD™ Kit, Associated B4, B4RS-RTR, B4.1 RTR, B4.1 Worlds( 2)


MIP C-CVD™ Bone, Associated B4, B4RS-RTR (1)
8126
$8.00

C-CVD™ Bone, Associated B4, B4RS-RTR (1)


MIP C-CVD™ Kit for Associated T4, T4RS-RTR, T4 Pro (2)
8127
$35.00

C-CVD™ Kit for Associated T4, T4RS-RTR, T4 Pro (2)


MIP C-CVD™ Bone, Associated T4, T4RTR (1)
8128
$8.00

C-CVD™ Bone, Associated T4, T4RTR (1)


MIP C-CVD™ Bone, Associated GT2, GT2 RTR (1)
8130
$8.00

C-CVD™ Bone, Associated GT2, GT2 RTR (1)


MIP C-CVD™ Axle, Associated T4, B4 (1)
8141
$8.00

C-CVD™ Axle, Associated T4, B4 (1)


MIP C-CVD™ Axle, Associated GT2 (1)
8142
$8.00

C-CVD™ Axle, Associated GT2 (1)


MIP CVD™ Kit, Associated RC10T2 3/16 inch axle
1082CLASSIC. You may order, if no inventory we will contact you about this limited item. …
$35.50

CVD™ Kit, Associated RC10T2 3/16 inch axle


MIP C-CVD™ Axle, Associated SC10
9129
$8.00

C-CVD™ Axle, Associated SC10


MIP Ball Diff Rebuild Kit, Associated SC10, T4, B4
9131
$10.00

Ball Diff Rebuild Kit, Associated SC10, T4, B4


MIP Ball Diff Male Outdrive, Associated SC10
9132
$9.00

Ball Diff Male Outdrive, Associated SC10


MIP Ball Diff Female Outdrive, Associated SC10
9133
$9.00

MIP Ball Diff Female Outdrive, Associated SC10


MIP Ball Diff 52T Gear, Associated SC10, T4, B4
9134
$3.50

MIP Ball Diff 52T Gear, Associated SC10, T4, B4


MIP Ball Diff Screw, Associated SC10, T4, B4
9135
$4.00

MIP Ball Diff Screw, Associated SC10, T4, B4


HW-SPRING/ Ball Diff, Associated SC10 (1)
9148
$1.50

HW-SPRING/ Ball Diff, Associated SC10 (1)


MIP Ball Diff Thrust Washers, Associated SC10, T4, B4 (2pcs.)
9151
$2.00

MIP Ball Diff Thrust Washers, Associated SC10, T4, B4 (2pcs.)


MIP CVD™ Kit, Associated RC10T/GT with 1/4 inch axle
1008CLASSIC. You may order, if no inventory we will contact you about this limited item….
$32.50

MIP CVD™ Kit, Associated RC10T/GT with 1/4 inch axle


MIP Clutch 4-N-1 Kit, Associated RC10GT
3012
$18.00

MIP Clutch 4-N-1 Kit, Associated RC10GT


MIP Drive Axle Shiny, Associated 18R (1)
1576
$5.00

MIP Drive Axle Shiny, Associated 18R (1)


MIP Drive Bone Shiny, Associated 18R (1)
1577
$6.00

Result pages MIP Drive Bone Shiny, Associated 18R (1)


HW-SPRING/ Clutch, Associated GT (2)
99037
$3.00

Result pages HW-SPRING/ Clutch, Associated GT (2)

mip-part-12101.jpg
MIP Bypass1™ Kit, Associated 2wd and 4wd 1/10th (.406) and Legend Style
12101
$30.00

MIP Bypass1™ Kit, Associated 2wd and 4wd 1/10th (.406) and Legend Style

mip-part-12111.jpg
MIP Bypass1™ Kit, Associated SC10 4×4 1/10th 13mm Bore Size
12111 
$32.00

MIP Bypass1™ Kit, Associated SC10 4×4 1/10th 13mm Bore Size

mip-part-12110.jpg
MIP Bypass1™ Kit, Associated SC10 & T4 Trucks 1/10th (.406in) & Legend Style
12110 
$30.00

MIP Bypass1™ Kit, Associated SC10 & T4 Trucks 1/10th (.406in) & Legend Style